CH53-E Multisensor
5MP Coverage in All Directions From a Single Install Point
Coming soon
Vertical: 76° - 29° (70° - 28°)
Diagonal: 145° - 47° (116° - 44°)
Pan: +/- 180°
Rotation: +/- 90° for each lens
0 lux with IR Illuminators on
Card: MicroSD, SDXC
Standard quality (SQ): Up to 600 Kbps
Without IR: 37-57V, 0.51-0.33A, 19.0W
Extended temperature range: 43-57V, 1.20-0.90A, 51.0W
RFC 2326
Max concurrent streams: 8 (2 per camera head)
Audio support: Yes
Mount plate: 528g / 18.62oz
H: 117.0mm / 4.61in with mount plate
H: 115.0mm / 4.53in without mount plate
1All our cameras record in "adaptive quality," capturing both standard (SQ) and high quality (HQ) streams. SQ video is stored up to the amount of retention specified by the customer. The amount of HQ video stored on the camera will depend on the amount of motion detected by the camera over time. To learn more, visit our website: https://docs.verkada.com/docs/adaptive-quality-recording-whitepaper.pdf
2Lens Distortion Correction (LDC) crops the sensor field of view to deliver a rectified, undistorted output image.
3Extended temperature range includes operating temperatures below -10°C / 14°F and assumes IR will be enabled.
4All the listed features can be enabled independently for each camera head.
5Frame rate can be adjusted by support.
Accessories
ACC-MNT-ARM-1
Arm Mount
Wall mounted extender arm with built in 1.5” female NPT thread.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-XLARM-1
Large Arm Mount
Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-POLE-1
Pole Mount
For mounting cameras to circular poles 2" to 6" in diameter.
ACC-MNT-ARM-1
Arm Mount
Wall mounted extender arm with built in 1.5” female NPT thread.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-POLE-1
Pole Mount
For mounting cameras to circular poles 2" to 6" in diameter.
ACC-MNT-XLARM-1
Large Arm Mount
Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-CORNER-1
Corner Mount
Mount for installing cameras and accessories to external corners.
ACC-MNT-ARM-1
Arm Mount
Wall mounted extender arm with built in 1.5” female NPT thread.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.
ACC-MNT-CORNER-1
Corner Mount
Mount for installing cameras and accessories to external corners.
ACC-MNT-XLARM-1
Large Arm Mount
Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.
ACC-MNT-HPEND-1
Four-Camera Multisensor Pendant Cap Mount
Threaded cap features built in 3/4" female NPT and 1.5” male NPT threads. Compatible with the CH53-E and CH63-E only.