Demo
EN (CA)
EN (CA)
Get demo

CP52-E PTZ

5MP PTZ for Expansive and Detailed Coverage of Large Areas

5MP
Image Resolution
28x
Optical Zoom
100m / 328ft
IR Range
IP66
and IK10 Rated

Product Specifications

Camera Features
Image Sensor
1 / 2.8" Progressive CMOS
Sensor Resolution1
5MP (2688 x 1944)
Lens Type
Varifocal; motorized zoom
Focal Length
5.2mm – 148.15mm
Aperture
F1.3 – F4.8
Iris
DC Iris
Field of View
Horizontal: 55° - 2°
Vertical: 42° - 2°
Diagonal: 66° - 3°
Sensor Movement
Tilt: 220°
Pan: 360°
Shutter Speed
1 / 30 sec. to 1 / 10,000 sec.
Day/Night
IR-cut filter for day and night function
IR Cut Filter
Yes
IR Range
100m / 328ft
Minimum Illumination
0.8 lux @ F1.4 (Color)
0 lux @ F1.4 with IR Illuminators on
Onboard Storage
Capacity: From 512GB to 3TB
Card: MicroSD, SDXC
CPU
Ambarella CV22S66

1All our cameras record in "adaptive quality", capturing both standard and high quality streams. Standard quality (SQ) video is stored up to the amount of retention specified by the customer. The amount of high quality video stored on the camera will depend on the amount of motion detected by the camera over time. To learn more, visit our website: https://docs.verkada.com/docs/adaptive-quality-recording-whitepaper.pdf

2Frame rate can be adjusted by support.

3The listed ranges indicate uplink bandwidth for specific target bitrates. For further details, refer to Verkada's Knowledge Base and read "Understanding Variable Bitrates for Verkada PTZ Cameras".

4Extended temperature range includes operating temperatures below -10°C / 14°F and assumes IR will be enabled.

5For details on the supported controllers for the CP52-E, refer to page 12 of this document.

Accessories

ACC-MNT-XLARM-1

Large Arm Mount

Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.

ACC-MNT-POLE-1

Pole Mount

For mounting cameras to circular poles 2" to 6" in diameter.

ACC-MNT-XLARM-1

Large Arm Mount

Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.

ACC-MNT-CORNER-1

Corner Mount

Mount for installing cameras and accessories to external corners.

ACC-MNT-XLARM-1

Large Arm Mount

Wall mount arm for larger cameras. Includes 1.5” NPT to connect to pendant caps and 3/4" NPT at the base for conduit.

Try Verkada for Free

Our 30-day trial includes one device and full access to the Command management platform.

Start a Free Trial